: Hey All,

: I'm wiring the deck panels to the Cirrus this weekend. I'm wondering how
: other Cirrus builders stitched the outer deck panels to the stations wher
: Vaclav has only provided one hole per station in the plans. The hull
: plates have a hole on either side of a station and it is very obvious how
: it should be done. I could drill another hole per station but if I can
: eliminate a few holes I'd later have to fill that would be super.

: Best, Dave

It has been a while since I went through that, but I believe the hole was large enough for two wires, 1 from the top of the last hull plate and 1 from the first hole of the outside deck plate.