: I've followed the various threads on the bead & cove router bits - and
: I'm a bit confused. The set that most folks seem to prefer is the Lee
: Valley Flute & bead bit set - item # 16J42.10 - but I see the radius
: on these is only 1/8". Don't I need a radius of 1/4", which is
: the thickness of my strip?

: Thanks for any words of wisdom!

Tthe 1/4 inch diameter of the cutting edge will work fine on 1/4 inch and 3/16th, and even 1/8th inch strips. Some people are looking at cutters with a bigger radius as these remove a bit less wood from the strips and seem to work as well.

PGJ