Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Butt Joints & Epoxy
By:Don
Date: 2/13/2003, 8:07 am
In Response To: S&G: Butt Joints & Epoxy (Kevin T)

I had a similar problem with my first butt joints. It sounds like you might of needed more epoxy and needed to work the epoxy into the tape better. I found the construction to be a very slow proccess. Don't be in a hurry and plan on learning a lot as you go through the different steps. No matter how much preperation and reading you do, there are going to be plenty of surprises. I knock of high spots and smoothed edges with a scraper while the epoxy is green. I rounded the corners of my scraper after making a couple gouges in the wood. Many problems can be fixed as you go. Don't worry about some of the flaws. No one will see them except you. Good luck.

Messages In This Thread

S&G: Butt Joints & Epoxy
Kevin T -- 2/13/2003, 1:05 am
Re: S&G: Butt Joints & Epoxy
Jeff The Tall -- 2/13/2003, 4:08 pm
Re: S&G: Butt Joints & Epoxy
Jay Babina -- 2/13/2003, 11:35 am
Re: S&G: Butt Joints & Epoxy
srchr/gerald -- 2/13/2003, 11:14 am
Re: S&G: Butt Joints & Epoxy
LeeG -- 2/13/2003, 11:45 am
very carefully...
srchr/gerald -- 2/13/2003, 5:17 pm
Re: S&G: Butt Joints & Epoxy
shawn servoss -- 2/13/2003, 11:58 am
Re: S&G: Butt Joints & Epoxy
LeeG -- 2/13/2003, 12:07 pm
Re: butt joints
ootek -- 2/13/2003, 3:32 pm
Re: butt joints
LeeG -- 2/13/2003, 3:39 pm
Re: S&G: Butt Joints & Epoxy
shawn servoss -- 2/13/2003, 12:15 pm
Re: S&G: Butt Joints & Epoxy
LeeG -- 2/13/2003, 10:13 am
Perfect Butt Joints
Severne -- 2/13/2003, 5:52 pm
Re: butt joints
ootek -- 2/13/2003, 3:43 pm
Re: S&G: Butt Joints & Epoxy *LINK*
Kurt Loup, Baton Rouge -- 2/13/2003, 12:02 pm
Re: S&G: Butt Joints & Epoxy
Dan Beatty -- 2/13/2003, 11:38 am
Re: S&G: Butt Joints & Epoxy
Don Lucas -- 2/13/2003, 11:11 am
Re: butt joints
ootek -- 2/13/2003, 10:11 am
Re: S&G: Butt Joints & Epoxy
Jim Kozel -- 2/13/2003, 10:08 am
Re: S&G: Butt Joints & Epoxy
Mark Normand -- 2/13/2003, 9:37 am
Re: S&G: Butt Joints & Epoxy
Don -- 2/13/2003, 8:07 am
Re: S&G: Butt Joints & Epoxy
Shawn Servoss -- 2/13/2003, 1:33 am