Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Butt Joints & Epoxy
By:Jim Kozel
Date: 2/13/2003, 10:08 am
In Response To: S&G: Butt Joints & Epoxy (Kevin T)

: I thought I was sooooo prepared going into this thing. I did so much
: research, reading, etc. The reality is that it's much slower going than I
: realized. Yet, spirits remain high. It’s pouring rain outside. What better
: weather than to build a boat in?

Don't use that lousy fiber glass tape. It's the devil to wet out and you end up with sanding and scraping the sewn tape edge. You'll have less hassle if you just cut a few strips of regular 6 oz. cloth and use that instead of the tape. It will wet out just great and you'll have lots less clean up.

Under 5 inches of snow in Cleveland.

Jim

Messages In This Thread

S&G: Butt Joints & Epoxy
Kevin T -- 2/13/2003, 1:05 am
Re: S&G: Butt Joints & Epoxy
Jeff The Tall -- 2/13/2003, 4:08 pm
Re: S&G: Butt Joints & Epoxy
Jay Babina -- 2/13/2003, 11:35 am
Re: S&G: Butt Joints & Epoxy
srchr/gerald -- 2/13/2003, 11:14 am
Re: S&G: Butt Joints & Epoxy
LeeG -- 2/13/2003, 11:45 am
very carefully...
srchr/gerald -- 2/13/2003, 5:17 pm
Re: S&G: Butt Joints & Epoxy
shawn servoss -- 2/13/2003, 11:58 am
Re: S&G: Butt Joints & Epoxy
LeeG -- 2/13/2003, 12:07 pm
Re: butt joints
ootek -- 2/13/2003, 3:32 pm
Re: butt joints
LeeG -- 2/13/2003, 3:39 pm
Re: S&G: Butt Joints & Epoxy
shawn servoss -- 2/13/2003, 12:15 pm
Re: S&G: Butt Joints & Epoxy
LeeG -- 2/13/2003, 10:13 am
Perfect Butt Joints
Severne -- 2/13/2003, 5:52 pm
Re: butt joints
ootek -- 2/13/2003, 3:43 pm
Re: S&G: Butt Joints & Epoxy *LINK*
Kurt Loup, Baton Rouge -- 2/13/2003, 12:02 pm
Re: S&G: Butt Joints & Epoxy
Dan Beatty -- 2/13/2003, 11:38 am
Re: S&G: Butt Joints & Epoxy
Don Lucas -- 2/13/2003, 11:11 am
Re: butt joints
ootek -- 2/13/2003, 10:11 am
Re: S&G: Butt Joints & Epoxy
Jim Kozel -- 2/13/2003, 10:08 am
Re: S&G: Butt Joints & Epoxy
Mark Normand -- 2/13/2003, 9:37 am
Re: S&G: Butt Joints & Epoxy
Don -- 2/13/2003, 8:07 am
Re: S&G: Butt Joints & Epoxy
Shawn Servoss -- 2/13/2003, 1:33 am