Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Resolving the Cirrus Deck Issue
By:Jim Kozel
Date: 2/14/2003, 3:03 pm
In Response To: Resolving the Cirrus Deck Issue (grant)

: Any strategies to check the deck panels without all of these steps?

Possibly position the deck panels to check for fit and if you find a bit of a gap at the stern or bow, shave down or remove the station where the gap starts to occur, then reinstall the station when you glass the outside of the hull.

Messages In This Thread

S&G: Twin Cirruses...!
David Hill -- 2/14/2003, 12:29 pm
Re: S&G: Twin Cirruses...!
David Hanson -- 2/14/2003, 4:39 pm
Cirrus Deck
grant -- 2/14/2003, 1:04 pm
Re: Cirrus Deck
Chris Moore -- 2/14/2003, 7:20 pm
Re: Cirrus Deck
Jim Kozel -- 2/14/2003, 2:47 pm
Resolving the Cirrus Deck Issue
grant -- 2/14/2003, 2:56 pm
Response from Vaclav
grant -- 2/14/2003, 5:54 pm
Re: Resolving the Cirrus Deck Issue
Jim Kozel -- 2/14/2003, 3:03 pm
Re: Resolving the Cirrus Deck Issue
grant -- 2/14/2003, 3:17 pm
Maybe no issue...
David Hill -- 2/14/2003, 3:49 pm