Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Resolving the Cirrus Deck Issue
By:grant
Date: 2/14/2003, 3:17 pm
In Response To: Re: Resolving the Cirrus Deck Issue (Jim Kozel)

: Possibly position the deck panels to check for fit and if you find a bit of a
: gap at the stern or bow, shave down or remove the station where the gap
: starts to occur, then reinstall the station when you glass the outside of
: the hull.

Can you determine potential gaps by lying the panels down on a flat surface or do I need to do some stitching?

grant

Messages In This Thread

S&G: Twin Cirruses...!
David Hill -- 2/14/2003, 12:29 pm
Re: S&G: Twin Cirruses...!
David Hanson -- 2/14/2003, 4:39 pm
Cirrus Deck
grant -- 2/14/2003, 1:04 pm
Re: Cirrus Deck
Chris Moore -- 2/14/2003, 7:20 pm
Re: Cirrus Deck
Jim Kozel -- 2/14/2003, 2:47 pm
Resolving the Cirrus Deck Issue
grant -- 2/14/2003, 2:56 pm
Response from Vaclav
grant -- 2/14/2003, 5:54 pm
Re: Resolving the Cirrus Deck Issue
Jim Kozel -- 2/14/2003, 3:03 pm
Re: Resolving the Cirrus Deck Issue
grant -- 2/14/2003, 3:17 pm
Maybe no issue...
David Hill -- 2/14/2003, 3:49 pm