Ok...I have the station forms on the strongback. I curbed my natural tendency for fiddling with things and installed them following all of Ross Leidy's KayakFoundry dimensional layout so I could report whether they are accurate...or not. I am very happy to say that the plans are accurate. There are no anomalies that can't be attributed to tolerances that I work with. The waterline, sheerline, centerlines, and 2" layout lines I added for layout help were all easily within any tolerance I am capable of. At this time I need to do a little stern and bow shaping, but other than that I'm ready to start stripping. Once I cut out some strips I will do further checking and fine tuning as needed, if needed. So far I'm very happy with the design I did with the KayakFoundry. I have included a link below if anyone is interested in taking a look. I'm gonna also try to include a picture with this message...but...who knows what will happen.