Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Ready for first strip - HELP!
By:Steve Frederick
Date: 2/17/2003, 7:00 pm
In Response To: Strip: Ready for first strip - HELP! (Gordon Snapp)

Gordon,
I ripped the bead off the first strip @ 2deg. Later, when I started the deck, I planed a bevel on the first deck strip. I over-beveled, so that the joint would be closer. Worked for me. Hope this helps,
Steve

Messages In This Thread

Strip: Ready for first strip - HELP!
Gordon Snapp -- 2/17/2003, 5:11 pm
Re: Strip: Ready for first strip - HELP!
Jack Sanderson -- 2/18/2003, 9:55 am
Re: Strip: Ready for first strip - HELP!
mike allen -- 2/17/2003, 7:28 pm
Re: Strip: Ready for first strip - HELP!
Steve Frederick -- 2/17/2003, 7:00 pm
Re: Strip: Ready for first strip - HELP!
Wes -- 2/17/2003, 5:28 pm
Re: Strip: Ready for first strip - HELP! *LINK*
Steve Rasmussen -- 2/18/2003, 1:02 pm
Re: Strip: Ready for first strip - HELP!
Rod Tait -- 2/17/2003, 5:39 pm