Re: Strip: Ready for first strip - HELP!
By:mike allen
Date: 2/17/2003, 7:28 pm
Date: 2/17/2003, 7:28 pm
In Response To: Strip: Ready for first strip - HELP! (Gordon Snapp)
the others advice abt the joint is right on.
however i would make your sandwich after tacking or clamping those first 2 strips on (1 on ea side) and then take the break carefully munching and looking to see if the curve(s) formed are symmetrical and/or if they are acceptable to you espec espec the last foot or 2 near the bow and stern and the middle few ft where often close to straight(easy to get a little wavy here).
half an hr taken here doing this is probably the most important of all.
Messages In This Thread
- Strip: Ready for first strip - HELP!
Gordon Snapp -- 2/17/2003, 5:11 pm- Re: Strip: Ready for first strip - HELP!
Jack Sanderson -- 2/18/2003, 9:55 am- Re: Strip: Ready for first strip - HELP!
mike allen -- 2/17/2003, 7:28 pm- Re: Strip: Ready for first strip - HELP!
Steve Frederick -- 2/17/2003, 7:00 pm- Re: Strip: Ready for first strip - HELP!
Wes -- 2/17/2003, 5:28 pm- Re: Strip: Ready for first strip - HELP! *LINK*
Steve Rasmussen -- 2/18/2003, 1:02 pm- Re: Strip: Ready for first strip - HELP!
Rod Tait -- 2/17/2003, 5:39 pm - Re: Strip: Ready for first strip - HELP!
- Re: Strip: Ready for first strip - HELP!
- Re: Strip: Ready for first strip - HELP!