: Ok...I have the station forms on the strongback. I curbed my natural tendency
: for fiddling with things and installed them following all of Ross Leidy's
: KayakFoundry dimensional layout so I could report whether they are
: accurate...or not. I am very happy to say that the plans are accurate.
: There are no anomalies that can't be attributed to tolerances that I work
: with. The waterline, sheerline, centerlines, and 2" layout lines I
: added for layout help were all easily within any tolerance I am capable
: of. At this time I need to do a little stern and bow shaping, but other
: than that I'm ready to start stripping. Once I cut out some strips I will
: do further checking and fine tuning as needed, if needed. So far I'm very
: happy with the design I did with the KayakFoundry. I have included a link
: below if anyone is interested in taking a look. I'm gonna also try to
: include a picture with this message...but...who knows what will happen.

Thanks for the picture. It looks like form 1 (attached to the bow) should be moved forward about 8 inches. Otherwise you'll have an odd shaped keel/bow section. Also, shouldn't there be another set of forms on the bow? Like a .5 set.

Roger