Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Paint under or over the glass? *LINK*
By:Dave
Date: 3/19/2003, 2:16 am

Hi Dan,
I did some paint, I did some directly on the wood in Ink, (the Bird) and some after the filler coats of epoxy, (the quote.) There is epoxy over both. I used acrylic paint but I would do it under the glass next time as I sanded a little of it off during some of the finishing and didn't notice untill I was putting varnish on. I think most paints are O.K. as long as it isn't oil base.
Dave (click on the "photos" tab) the only thing that works on the link.

Messages In This Thread

Strip: Paint under or over the glass?
Dan -- 3/18/2003, 11:35 pm
Re: Strip: Paint under or over the glass?
Paul G. Jacobson -- 3/19/2003, 7:53 pm
Re: Strip: Paint under or over the glass?
Dan -- 3/20/2003, 1:54 am
Why not veneer instead?
Kyle T -- 3/20/2003, 7:43 am
Re: Why not veneer instead?
Dan -- 3/21/2003, 11:41 pm
Re: Why not veneer instead? *LINK* *Pic*
Kyle T -- 3/25/2003, 7:47 am
Re: Strip: Paint under or over the glass? *LINK* *Pic*
Kurt Maurer -- 3/19/2003, 10:15 am
Re: Strip: Paint under or over the glass?
Don -- 3/19/2003, 8:08 am
Re: Strip: Paint under or over the glass? *LINK*
Dave -- 3/19/2003, 2:16 am