Re: Strip: Hull and Deck are 1 again
By:Shawn Baker
Date: 4/7/2003, 4:19 pm
Date: 4/7/2003, 4:19 pm
In Response To: Strip: Hull and Deck are 1 again (Brian Ervin)
: Taped the inside seams Sat and Sun and was wondering how long I should wait
: b4 I remove all the packing tape and wedges. Kinda anxious to tape the
: outside, finish some details and get paddling.
Totally depends on the epoxy you used and the temperature. Also depends on how much tape you needed (how much pressure did it require to mate hull and deck?!)
A couple tests:
Can you dent the epoxy/tape with your fingernail--if so, leave the tape!!)
Sand a small spot on the tape...if it balls or sticks, don't remove the tape. If sanding produces dust, you're probably okay.
Shawn
Messages In This Thread
- Strip: Hull and Deck are 1 again
Brian Ervin -- 4/7/2003, 3:25 pm- Re: Strip: Hull and Deck are 1 again
Shawn Baker -- 4/7/2003, 4:19 pm
- Re: Strip: Hull and Deck are 1 again