Grant,
Your deck looks great and the different woods are very attractive. I used okoume for my Cirrus deck. I found that I had to trim the innermost panels to make them fit. They were just about 1/4" too big so I cut along the centerline and made them fit. Take your time and make sure that the panel edges line up perfectly. I wasn't as careful as I should have been and wound up with some misaligned panels. Subsequent sanding of the epoxy in the joints went through the top veneer in a couple of spots. Not a disaster on my boat but it would be with the gorgeous wood you are using.

I'm ready to glass but will wait until I return from a trip to Tennessee to visit my grandson. Should be home in mid June and then the epoxy will flow.

Best,
Bob Brownie