Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Pygmy Boats
By:Tony Scott
Date: 4/23/2003, 7:08 am
In Response To: Re: S&G: Pygmy Boats (Greg Morse)

: I'm in the process of final finishing my Coho. Like the others, I'd be happy
: to try and answer any questions.

: Greg

Very good.

Where I am at is I have the two keel planks (and the others) drilled for the wire ties. I dropped the project after I got confused over where to drill the holes to hold the forms in place. My understanding is that once the forms are in place and you start to tighten the wires, you need to make sure the edges of the planks line up. Seems straightforward. Any suggestions about wiring the forms in and the hull together are much appreciated.

Thanks!

Tony

Messages In This Thread

S&G: Pygmy Boats
Tony Scott -- 4/22/2003, 9:01 am
Pygmy Building Link
gregory -- 4/23/2003, 10:08 am
Re: S&G: Pygmy Boats
Greg Morse -- 4/22/2003, 10:41 pm
Re: S&G: Pygmy Boats
Tony Scott -- 4/23/2003, 7:08 am
Re: S&G: Pygmy Boats *LINK*
Mark Normand -- 4/24/2003, 9:02 am
Re: S&G: Pygmy Boats
Ken Sutherland -- 4/28/2003, 4:33 am
Re: S&G: Pygmy Boats
Tony Scott -- 4/24/2003, 9:39 am
Re: S&G: Pygmy Boats *LINK* *Pic*
Greg Morse -- 4/23/2003, 7:38 am
Re: S&G: Pygmy Boats
Don Lucas -- 4/23/2003, 9:57 am
Re: S&G: Pygmy Boats
Randy Knauff -- 4/22/2003, 5:57 pm
Re: S&G: Pygmy Boats
Taylor Warren -- 4/22/2003, 10:14 am
Re: S&G: Pygmy Boats
Tony Scott -- 4/22/2003, 1:58 pm
Re: S&G: Pygmy Boats
Ken -- 4/22/2003, 3:33 pm
Re: S&G: Pygmy Boats
Tony Scott -- 4/22/2003, 3:42 pm
Re: S&G: Pygmy Boats
Jeff The Tall -- 4/22/2003, 5:42 pm
Re: S&G: Pygmy Boats
Don Lucas -- 4/22/2003, 7:58 pm
Re: S&G: Pygmy Boats
Jeff The Tall -- 4/23/2003, 2:46 am
Re: S&G: Pygmy Boats
Taylor Warren -- 4/22/2003, 2:52 pm
Re: S&G: Pygmy Boats
LeeG -- 4/22/2003, 9:41 am