Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: S&G: Glassing over the bow and stern
By:Chip Sandresky
Date: 5/13/2003, 1:42 pm
Date: 5/13/2003, 1:42 pm
In Response To: S&G: Glassing over the bow and stern (Patsy)
: Other S&G builders - canoes or kayaks - how did you do the ends?
I carefully folded the glass around the bow on my S&G boat and then babysat it to make sure it stayed down. On this boat I didn't bother with that; I went back and epoxied a bias cut strip after. You could use your fast hardener-mix on the bias strip and it will stay in place even easier.
Messages In This Thread
- S&G: Glassing over the bow and stern
Patsy -- 5/13/2003, 12:27 pm- Brass stems a good idea
Robert N Pruden -- 5/14/2003, 12:19 pm- Re: S&G: Glassing over the bow and stern *Pic*
Bobby Curtis -- 5/13/2003, 5:51 pm- Re: S&G: Glassing over the bow and stern
Patsy -- 5/14/2003, 1:40 pm- Re: S&G: Glassing over the bow and stern
Bobby Curtis -- 5/14/2003, 6:01 pm
- Re: S&G: Glassing over the bow and stern
- Re: S&G: Glassing over the bow and stern *LINK*
Kyle T -- 5/13/2003, 4:28 pm- Re: S&G: Glassing over the bow and stern
Chip Sandresky -- 5/13/2003, 1:42 pm- Re: S&G: Glassing over the bow and stern
Randy Knauff -- 5/13/2003, 12:51 pm - Re: S&G: Glassing over the bow and stern *Pic*
- Brass stems a good idea
