Re: Strip: tips before I take the big dive
By:Steve Frederick
Date: 5/15/2003, 8:06 pm
Date: 5/15/2003, 8:06 pm
In Response To: Re: Strip: tips before I take the big dive (steve pollack)
Ditto on the two piece coaming. I did it that way on the Guillemot. Glued up one side at a time then shaped it on my router table with a 1/2" radius bit. (Use care and the guard!!) Then glued to the riser and shaped the rest easily by hand.
Steve
Messages In This Thread
- Strip: tips before I take the big dive
MikeJ -- 5/15/2003, 10:58 am- Re: Strip: tips before I take the big dive *LINK*
Marcel R. in Portland, Or. -- 5/16/2003, 12:33 pm - This worked for me *Pic*
Dave Sprygada -- 5/16/2003, 7:59 am- Re: This worked for me
John Greenway -- 5/16/2003, 8:16 pm- Wood Veneer types *Pic*
Dave Sprygada -- 5/17/2003, 8:49 am
- Wood Veneer types *Pic*
- Re: This worked for me
MikeJ -- 5/16/2003, 11:25 am- Re: This worked for me
DAVE SPRYGADA -- 5/16/2003, 2:18 pm
- Re: This worked for me
- Re: This worked for me
- Re: Strip: tips before I take the big dive
steve pollack -- 5/15/2003, 4:17 pm- Re: Strip: tips before I take the big dive
Steve Frederick -- 5/15/2003, 8:06 pm
- Re: Strip: tips before I take the big dive
- Re: Strip: tips before I take the big dive *LINK*