Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Wax and epoxy
By:Dan Ruff
Date: 5/16/2003, 5:02 pm
In Response To: Re: Fill the holes! (Grant)

: My deck has a series of different veneers and I had purchased some furniture
: crayons with the idea of filling the holes with the appropriate crayon
: prior to epoxying. The crayons are not as handy as I had hoped.

Grant, have you tried the crayons on the actual boat, or just a test panel? I'm not sure exactly what the ingredients of the wood repair crayons are, but I'm pretty sure wax is a major component. Epoxy won't stick to wax. If you have wax on the wood around the area of the holes, you may have a bigger problem than just how to fill the holes.

Personally, I didn't fill the holes in my boat. The unthickened epoxy filled them just fine. You can't see them from over 5-6 feet away, and even if you are closer, they don't look bad.

Good luck with whatever you do.
-Dan

Messages In This Thread

S&G: Filling Stitch Holes
Grant -- 5/16/2003, 2:49 pm
Re: S&G: Filling Stitch Holes
Malcolm Schweizer -- 5/16/2003, 10:46 pm
Re: S&G: Filling Stitch Holes - Don't Bother
Mike Hanks -- 5/16/2003, 6:03 pm
Re: S&G: Filling Stitch Holes
LeeG -- 5/16/2003, 5:18 pm
I agree with Robert...
srchr/gerald -- 5/16/2003, 4:38 pm
Fill the holes!
Robert N Pruden -- 5/16/2003, 3:22 pm
Re: Fill the holes!
Grant -- 5/16/2003, 3:44 pm
Wax and epoxy
Dan Ruff -- 5/16/2003, 5:02 pm
Re: Wax and epoxy
Grant -- 5/16/2003, 7:30 pm
Re: Mask and Fill
Dave Houser -- 5/16/2003, 4:53 pm
Re: S&G: Filling Stitch Holes
Dan G -- 5/16/2003, 3:21 pm