: Hi Grant, I have used epoxy/graphite on a canoe hull bottom. Mixing graphite
: with epoxy makes a very runny mixture. It will not stay on a vertical
: surface and will creep under masking tape as Larry mentioned. The mix I
: used was epoxy/graphite/cabosil. This makes a thicker mix and avoids the
: above problems. I applied two fill coats of this mixture and the black
: color is uniform. I got the proportions from Tom Angelakis' web site (link
: below).
: Good luck. Glen in Baie-St-Paul.

Glen:

Did you find that the graphite rubs off on your hands like Tom reports?

grant