Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Material: Recycled Cedar House Trim
By:Brian Wegener
Date: 5/26/2003, 1:03 am
In Response To: Re: Material: Resource Responsibility (Dan G)

For the second kayak I am building I got used cedar house trim from a guy who installs vinyl siding. He was happy to unload it to save him the dumping fees. He even took ALL the nails out.

Dealing with the paint is a royal pain, hard on the planer knives. I haven't tried carbide knives. Maybe some of you have. I ended up cutting the strips before removing the paint and then ripping the paint off on the table saw. Anybody got a better idea?

There are a lot of throw-away strips due to knots and nail holes. I did get some nice full length strips, but many more shorter ones to be scarfed.

I'd there is probably enough recyclable house trim and siding going to the dump to complete all the strip kayaks and canoes we could build. But using it adds a significant amount of time to the project.

Messages In This Thread

Material: Resource Responsibility
ChrisO -- 5/23/2003, 11:27 am
Re: Material: Resource Responsibility
Chip Sandresky -- 6/1/2003, 1:53 pm
Re: Material: Resource Responsibility
Colin -- 6/4/2003, 1:32 am
Re: Material: Resource Responsibility
Jeff The Tall -- 6/4/2003, 3:38 pm
Re: Material: Resource Responsibility
Colin -- 6/4/2003, 9:53 pm
Re: Material: Resource Responsibility
Colin -- 6/5/2003, 2:00 pm
Re: Material: Resource Responsibility *Pic*
Chip Sandresky -- 6/4/2003, 3:37 am
Re: Material: Resource Responsibility
Mark Woodhead -- 6/2/2003, 12:12 am
Re: Material: Resource Responsibility
Myrl Tanton -- 6/1/2003, 10:45 pm
Some Clarifications
Grant -- 6/4/2003, 10:43 am
Re: Material: Resource Responsibility
Jeff The Tall -- 6/2/2003, 3:52 pm
Re: Material: Resource Responsibility
Don -- 5/23/2003, 7:37 pm
Re: Material: Resource Responsibility
LeeG -- 5/23/2003, 6:13 pm
Old growth wood
Dan Ruff -- 5/23/2003, 5:32 pm
Re: Material: Resource Responsibility
Tom Yost -- 5/23/2003, 4:47 pm
Pessemistic and oh so true. *NM*
Robert N Pruden -- 5/23/2003, 6:28 pm
Re: Material: Resource Responsibility
Mike Loriz -- 5/23/2003, 5:28 pm
Re: Material: Resource Responsibility
mike loriz -- 5/23/2003, 4:26 pm
Re: Material: Resource Responsibility
Nick Schade - Guillemot Kayaks -- 5/23/2003, 2:21 pm
Humans are part of nature...
srchr/gerald -- 5/23/2003, 1:58 pm
"We Have Met the Enemy+He is US"
C. Fronzek -- 5/23/2003, 1:51 pm
Re: "We Have Met the Enemy+He is US"
Tom Yost -- 5/24/2003, 11:53 am
Re:Mea Culpa
C. Fronzek -- 5/23/2003, 2:02 pm
We live, we die...
Robert N Pruden -- 5/23/2003, 1:49 pm
Re: We live, we die...
PBM -- 5/23/2003, 3:54 pm
Re: We live, we die...
Robert N Pruden -- 5/23/2003, 3:56 pm
Re: We live, we die...
Bob Kelim -- 5/24/2003, 12:44 pm
Re: We live, we die...
PBM -- 5/23/2003, 3:58 pm
Re: We live, we die...
Robert N Pruden -- 5/23/2003, 4:01 pm
Re: Conservationism vs. Environmentalism
Shawn Baker -- 5/23/2003, 3:35 pm
Re: Conservationism vs. Environmentalism
Ed Falis -- 5/24/2003, 10:24 am
Definitions a bit fuzzy where I live...
Robert N Pruden -- 5/23/2003, 3:55 pm
Re: Material: Resource Responsibility
Dan G -- 5/23/2003, 1:42 pm
Re: Material: Recycled Cedar House Trim
Brian Wegener -- 5/26/2003, 1:03 am
Re: Thinner strips???
Scott Ferguson -- 5/23/2003, 1:23 pm
Re: Thinner strips???
Roger Nuffer -- 5/23/2003, 5:07 pm
I love plastic
Greg Bridges -- 5/23/2003, 1:54 pm
Re: I love plastic too...
Scott Ferguson -- 5/23/2003, 2:03 pm
Re: I love plastic too...
Greg Bridges -- 5/23/2003, 2:55 pm
Re: No worries Greg, I've done the same thing :D *NM*
Scott Ferguson -- 5/23/2003, 5:01 pm
Re: I love plastic too...
Shawn Baker -- 5/23/2003, 3:37 pm
Re: Material: Resource Responsibility
Chip Sandresky -- 5/23/2003, 12:48 pm
Re: Material: Resource Responsibility
Paul J -- 5/23/2003, 12:42 pm
Re: Material: Resource Responsibility
Tim Eastman -- 5/23/2003, 12:37 pm
Re: Material: Resource Responsibility
DAVE SPRYGADA -- 5/23/2003, 12:32 pm
Re: Material: Resource Responsibility
Tom Yost -- 5/23/2003, 12:04 pm