: Question Two: Brush or roller. I had always throught a foam roller was the
: way to go, but yesterday I started reading that using a brush reduces the
: air-bubbles and was better for fill coats...

Yeah I got those darned bubbles the other day after my first fill coat. This is my first serieous experience with epoxy. The wet out went very smoothly and the fill coat with a roller went very smoothly ... or so I thought. I had minimal drips but when I looked closely the next day lots of fish eyes.

So I spent 1 1/2 hours sanding yesterday to remove that fill coat. I will be using a squeegee this time!

grant