Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: Tape Gunk
By:Myrl Tanton
Date: 6/5/2003, 12:03 am
In Response To: Epoxy: Tape Gunk (JIm Looker)

some one recommeded using an eraser... I've yet to try. I had the same problem. I used vineger and elbow grease (with an old sock as a cloth) I found it was the elbow grease that worked. I got all the tape off my hull in about 5 hours. I had left the tape on for several months.... ugh. Based on the way it rolled off, I suspect the eraser trick would have worked will. Unfortunatly I read it a day or two after I was done.

the packing tape left very little residue. When it did it was easy to get off. Of course I only left it on for two days.

Myrl

Messages In This Thread

Epoxy: Tape Gunk
JIm Looker -- 6/4/2003, 12:53 pm
Re: Epoxy: Tape Gunk
Jack Sanderson -- 6/5/2003, 11:14 am
Re: Epoxy: Tape Gunk
Myrl Tanton -- 6/5/2003, 12:03 am
Re: Epoxy: Tape Gunk
Mitch -- 6/5/2003, 12:22 am
Re: Epoxy: Tape Gunk
Russ Chambers -- 6/4/2003, 7:05 pm
Re: Epoxy: Tape Gunk
Glen Smith -- 6/4/2003, 1:36 pm