Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Paddle: GP blank hunting
By:Brian Ervin
Date: 6/10/2003, 4:06 pm
In Response To: Paddle: GP blank hunting (Dan G)

I found WRC at HD that worked for a paddle. On the 2nd paddle there was a knot near the edge 1/2 way down the blade, it popped out at about 80% complete. Just mixed up some epoxy with sanding dust and silica, all is well.

Laminating is fine, just use a water-proof glue (if you are not going to seal with varnish or epoxy).

Good Luck with your paddle.

Messages In This Thread

Paddle: GP blank hunting
Dan G -- 6/9/2003, 9:42 pm
Re: Paddle: GP blank hunting
Don -- 6/14/2003, 5:16 am
Re: Paddle: GP blank hunting
Tony W. -- 6/10/2003, 5:51 pm
Re: Paddle: GP blank hunting
Brian Ervin -- 6/10/2003, 4:06 pm
Re: Paddle: GP blank hunting
Ben Staley -- 6/10/2003, 10:58 am
Re: Paddle: GP blank hunting
Dan G -- 6/10/2003, 11:41 am