Thanks Rehd,

I'm planning on using the Bote-Cote epoxy system, supplied in Australia by Boat Pacific P/L. With it being winter down here I will have the opposite problem & will need to use an accelerator to help the curing along.

Regards Bill.

: I built one of their kits once. An 8' dingy. Design was good, and easy to
: build.
: One recommendation: Don't use Glen-L's epoxy. It's very fast curing. I had
: what they called their slow epoxy and in 100* tempuratures I was getting 7
: to 10 minutes of working time. Had a devil of a time doing the seam
: fillets and even pre-coating the hull.

: Rehd