Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Kayk: Build from Plans
By:Danny
Date: 6/19/2003, 8:14 pm
In Response To: Re: S&G: Kayk: Build from Plans (Joe)

: It's not solid birch. It's a three-ply plywood with a fairly thin birch
: veneer.

Sorry, can't say, the birch I use is all birch. If you can look at a large stack of the ply, look at the sides for voids. That will tell you a lot about the ply. You do not want voids.

Danny

Messages In This Thread

S&G: Kayk: Build from Plans
Joe -- 6/19/2003, 6:53 pm
I used 1/4 inch luan
Dan Ruff -- 6/20/2003, 12:59 pm
Re: Plywood 101
C. Fronzek -- 6/20/2003, 12:15 am
Re: S&G: Kayk: Build from Plans
David Hill -- 6/19/2003, 10:11 pm
Re: S&G: Kayk: Build from Plans
Paul G. Jacobson -- 6/19/2003, 10:09 pm
Re: S&G: Kayk: Build from Plans
Danny -- 6/19/2003, 7:12 pm
Re: S&G: Kayk: Build from Plans
Joe -- 6/19/2003, 8:07 pm
Re: S&G: Kayk: Build from Plans
Danny -- 6/19/2003, 8:14 pm