Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: "Spread" before or after glassing inter
By:Rick Sylvia
Date: 6/23/2003, 3:18 pm
In Response To: Re: Epoxy: "Spread" before or after glassing inter (Rob Macks)

I don't think I understand the answers. If you remove the sticks as you glass, and return the sticks once you have the cloth wet out, then won't the stick be glued to the boat if you return the sticks? Are you perhaps leaving a spot un-epoxied where each the stick is, then coming back and wetting it out the next day?

I'm missing something, but what???

Thanks

Rick

Messages In This Thread

Epoxy: "Spread" before or after glassing interior?
Rick Sylvia -- 6/23/2003, 8:12 am
Re: Epoxy: "Spread" before or after glassing inter
Rob Macks -- 6/23/2003, 1:37 pm
Re: Epoxy: "Spread" before or after glassing inter
Rick Sylvia -- 6/23/2003, 3:18 pm
Re: Epoxy: "Spread" before or after glassing inter
Rob Macks -- 6/25/2003, 8:06 am
Re: Epoxy: "Spread" before or after glassing inter
Jim Horlacher -- 6/23/2003, 5:22 pm
Re: Epoxy: "Spread" before or after glassing inter
srchr/gerald -- 6/23/2003, 4:59 pm
Re: Epoxy: "Spread" before or after glassing inter
myrl -- 6/23/2003, 4:04 pm
Re: Epoxy: "Spread" before or after glassing inter
Rick Sylvia -- 6/23/2003, 4:10 pm
Re: Epoxy: "Spread" before or after glassing inter
srchr/gerald -- 6/23/2003, 11:12 am
Re: Epoxy: "Spread" before or after glassing inter
myrl -- 6/23/2003, 9:59 am