Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: "Spread" before or after glassing inter
By:Jim Horlacher
Date: 6/23/2003, 5:22 pm

Another option: Cover the ends of the sticks with clear packing tape. Or, put some varnish on the ends of the sticks and let them dry.

: I don't think I understand the answers. If you remove the sticks as you
: glass, and return the sticks once you have the cloth wet out, then won't
: the stick be glued to the boat if you return the sticks? Are you perhaps
: leaving a spot un-epoxied where each the stick is, then coming back and
: wetting it out the next day?

: I'm missing something, but what???

: Thanks

: Rick

Messages In This Thread

Epoxy: "Spread" before or after glassing interior?
Rick Sylvia -- 6/23/2003, 8:12 am
Re: Epoxy: "Spread" before or after glassing inter
Rob Macks -- 6/23/2003, 1:37 pm
Re: Epoxy: "Spread" before or after glassing inter
Rick Sylvia -- 6/23/2003, 3:18 pm
Re: Epoxy: "Spread" before or after glassing inter
Rob Macks -- 6/25/2003, 8:06 am
Re: Epoxy: "Spread" before or after glassing inter
Jim Horlacher -- 6/23/2003, 5:22 pm
Re: Epoxy: "Spread" before or after glassing inter
srchr/gerald -- 6/23/2003, 4:59 pm
Re: Epoxy: "Spread" before or after glassing inter
myrl -- 6/23/2003, 4:04 pm
Re: Epoxy: "Spread" before or after glassing inter
Rick Sylvia -- 6/23/2003, 4:10 pm
Re: Epoxy: "Spread" before or after glassing inter
srchr/gerald -- 6/23/2003, 11:12 am
Re: Epoxy: "Spread" before or after glassing inter
myrl -- 6/23/2003, 9:59 am