Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: "Spread" before or after glassing inter
By:Rob Macks
Date: 6/25/2003, 8:06 am

: I don't think I understand the answers. If you remove the sticks as you
: glass, and return the sticks once you have the cloth wet out, then won't
: the stick be glued to the boat if you return the sticks? Are you perhaps
: leaving a spot un-epoxied where each the stick is, then coming back and
: wetting it out the next day?

: I'm missing something, but what???

: Thanks

: Rick

The sticks are easy to remove when the resin is leather hard
and often just leave a bump of resin you can pare down with
a chisel.

All the best,
Rob Macks
Laughing Loon CC&K
www.laughingloon.com

Messages In This Thread

Epoxy: "Spread" before or after glassing interior?
Rick Sylvia -- 6/23/2003, 8:12 am
Re: Epoxy: "Spread" before or after glassing inter
Rob Macks -- 6/23/2003, 1:37 pm
Re: Epoxy: "Spread" before or after glassing inter
Rick Sylvia -- 6/23/2003, 3:18 pm
Re: Epoxy: "Spread" before or after glassing inter
Rob Macks -- 6/25/2003, 8:06 am
Re: Epoxy: "Spread" before or after glassing inter
Jim Horlacher -- 6/23/2003, 5:22 pm
Re: Epoxy: "Spread" before or after glassing inter
srchr/gerald -- 6/23/2003, 4:59 pm
Re: Epoxy: "Spread" before or after glassing inter
myrl -- 6/23/2003, 4:04 pm
Re: Epoxy: "Spread" before or after glassing inter
Rick Sylvia -- 6/23/2003, 4:10 pm
Re: Epoxy: "Spread" before or after glassing inter
srchr/gerald -- 6/23/2003, 11:12 am
Re: Epoxy: "Spread" before or after glassing inter
myrl -- 6/23/2003, 9:59 am