: I used the white general purpose glue and didn't rough up the epoxy surface
: at all. I started at the ends, where there was no warping, putting a wedge
: every foot or so (I didn't measure - just eyeballed it)and worked towards
: the centre. I think if I had started at the centre the wedges would
: probably have popped. Starting at the ends moves the hull and deck closer
: together incrementally so that the stresses are divided between all the
: wedges. I was both surprised and pleased that it worked so well. Hope that
: helps.

Hi guys,
Well I cut myself a bucket of wedges last night, and the glue is not holding well. Very little pressure knocks them off. I am out of town this weekend, so probably no building time for a few days. I will be off to the hardware store to see if I am using an inferior glue stick. I'll let you all know next week.

thanks again,
Borre