: Hello all,
: While I was at work today my wife decided she would try to help me finish the
: frame work on my kayak. As it turns out the aft deck stringer got pegged
: down way out of alignment. Does anyone see a problem with cutting the
: dowels (if possible) and moving them to the correct location/positions?

: Thanks again
: Richard

I had some mistakes in my frame where I had to cut the dowels and drill new holes. You want to glue the cut-off dowels in place to fill the old hole and sand flat. Then drill the new hole. Hopefully the new doesn't overlap the old. But if it does, the glue should hold the old dowel in place.

sing