Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: hatch holderdowners...
By:Shawn Baker
Date: 7/23/2003, 11:00 am
In Response To: Re: Strip: hatch holderdowners... *LINK* (Dan G)

Another consideration is the type of webbing.

Nylon webbing stretches when wet, shrinks when dry.

Polypropylene webbing is more dimensionally stable.

Nylon webbing looks better, and generally has a finer, tighter weave. If it looks bigger and "loopier", and less stiff, it's probably polypropylene.

: If you're looking for webbing, buckles, etc. you might try Seattle Fabrics.

: My experience with webbing hold-downs was not positive - this was on a Dagger
: tupperboat with hard hatches over neoprene. With any amount of rolling,
: I'd get a couple of cups in the hatch, and that neoprene was the devil to
: get on. I always found it tough to get the webbing tight enough while
: still reasonable to get the Fastex-style buckles closed. One thing I'd
: consider as an would be the cam-style buckles.

Messages In This Thread

Strip: hatch holderdowners...
srchr/gerald -- 7/22/2003, 9:02 pm
This BB is unbelivable!! Mind reading at it's best
Timothy -- 7/23/2003, 11:26 pm
Re: Insurance with tape
Dave Houser -- 7/24/2003, 3:28 pm
Thanks for all the info...
srchr/gerald -- 7/23/2003, 5:06 pm
Re: Strip: hatch holderdowners...
Nick Schade - Guillemot Kayaks -- 7/23/2003, 3:54 pm
Re: Strip: hatch holderdowners...
Dan G -- 7/25/2003, 8:31 am
Why re-invent the wheel? *LINK* *Pic*
Dan Ruff -- 7/24/2003, 11:30 am
One answer...
srchr/gerald -- 7/24/2003, 6:32 pm
Re: Why re-invent the wheel?
Rob Macks -- 7/24/2003, 1:09 pm
Re: Why re-invent the wheel?
Jay Doorly -- 7/25/2003, 10:27 am
Re: Why re-invent the wheel?
Rob Macks -- 7/24/2003, 12:45 pm
Re: Why re-invent the wheel?
Dan Ruff -- 7/24/2003, 1:07 pm
More hatch hardware *LINK*
Dan Ruff -- 7/24/2003, 11:34 am
I like the idea, but...
Brian Nystrom -- 7/24/2003, 12:50 pm
Re: I like the idea, but...
Dan Ruff -- 7/24/2003, 1:17 pm
Re: Strip: hatch holderdowners...
Rob Macks -- 7/23/2003, 7:36 pm
Re: Strip: hatch holderdowners...
Nick Schade - Guillemot Kayaks -- 7/24/2003, 9:32 am
Re: Strip: hatch holderdowners...
Shawn Baker -- 7/24/2003, 1:18 pm
Re: Strip: hatch holderdowners...
John Schroeder -- 7/23/2003, 10:45 pm
Re: Strip: hatch holderdowners...
Rob Macks -- 7/23/2003, 7:41 pm
Re: Strip: hatch holderdowners...
Ron Deane -- 7/24/2003, 12:42 am
Re: Strip: hatch holderdowners...
Rob Macks -- 7/24/2003, 7:21 am
Re: Strip: hatch holderdowners...
Kyle T -- 7/24/2003, 8:23 am
Re: Strip: hatch holderdowners...
Rob Macks -- 7/24/2003, 10:44 am
Re: Buckle & Webbing Supplier *NM* *LINK* *Pic*
Dave Houser -- 7/23/2003, 2:57 pm
Re: Strip: hatch holderdowners... *Pic*
Chris Moore -- 7/23/2003, 12:13 pm
Re: Strip: hatch holderdowners...
Scott Fitzgerrell -- 7/23/2003, 12:56 pm
Re: Strip: hatch holderdowners...
Chris Moore -- 7/23/2003, 1:38 pm
Re: Strip: hatch holderdowners... *LINK*
Dan G -- 7/23/2003, 8:10 am
Re: Strip: hatch holderdowners...
Shawn Baker -- 7/23/2003, 11:00 am
Re: Strip: hatch holderdowners...
Terry Hanson -- 7/23/2003, 12:37 am
Re: Strip: hatch holderdowners... *Pic*
Rob Macks -- 7/23/2003, 2:34 pm
Rob, what size gasket material?
Jim in ND -- 7/25/2003, 10:24 am
Re: Rob, what size gasket material?
Rob Macks -- 7/25/2003, 2:19 pm
Magnets and compasses
Shawn Baker -- 7/23/2003, 5:53 pm
Re: Magnets and compasses
Rob Macks -- 7/23/2003, 7:51 pm
Re: Magnets and compasses
KenC -- 7/24/2003, 12:10 am
Re: Magnets and compasses
Shawn Baker -- 7/23/2003, 8:11 pm
Re: Magnets and compasses
Ted Henry -- 7/23/2003, 6:56 pm
Good write up...
srchr/gerald -- 7/23/2003, 5:03 pm
Re: Strip: hatch holderdowners...
srchr/gerald -- 7/23/2003, 11:16 am