Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Epoxy: GLASSING THE LIP
By:Jack Sanderson
Date: 7/28/2003, 8:49 am
In Response To: Epoxy: GLASSING THE LIP (Rick Sylvia)

Rick,

I don't know if you have already put on the lip but I didn't try to glass the lip on my Guillemot. I glassed on the outside and inside of the riser prior to laminating a lip with an ash strip. 5 years later I have had no problems with the lip. It was costed in epoxy and varnished but it is plenty strong without the glass.

Regards,

Jack

Messages In This Thread

Epoxy: GLASSING THE LIP
Rick Sylvia -- 7/28/2003, 8:18 am
Epoxy: Great Commnets - THANKS!
Rick Sylvia -- 7/29/2003, 8:19 am
Re: Epoxy: GLASSING THE LIP *Pic*
rnb4tla -- 7/28/2003, 10:50 pm
Re: Epoxy: GLASSING THE LIP
Chip Sandresky -- 7/28/2003, 1:31 pm
bias cut cloth & fillets in corners = no problems *NM*
Kurt Hoffman -- 7/28/2003, 12:41 pm
Re: Epoxy: GLASSING THE LIP
srchr/gerald -- 7/28/2003, 11:03 am
Re: lip gloss... er, glass
ootek -- 7/28/2003, 9:49 am
Re: Epoxy: GLASSING THE LIP
Dave Sprygada -- 7/28/2003, 8:54 am
Re: Epoxy: GLASSING THE LIP
Jack Sanderson -- 7/28/2003, 8:49 am
Re: Epoxy: GLASSING THE LIP
Jay Babina -- 7/28/2003, 5:27 pm
Re: Epoxy: GLASSING THE LIP
Rick Sylvia -- 7/28/2003, 8:56 am