Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: S&G: Follow Directions OR follow forum experim *LINK*
By:John Schroeder
Date: 8/5/2003, 10:19 pm
In Response To: Re: S&G: Follow Directions OR follow forum experim (Matthew)

: The most elegant solution by far is the floating tenon employed by Mike Hanks
: and Ted Henry. They and a friend used a shaper with a very thin kerf blade
: to remove the inner plys, then glued in a floating mortise. All but
: invisible and super strong. Mr. Henry used to have pictures on his site,
: but it seems to be down at the moment.

Ted's Kayak stuff is at http://www.metakrome.com/kayak/home.html -- The direct link to the spline documentation is below.

jrs

Ted's spline documentation

Messages In This Thread

S&G: Follow Directions OR follow forum experiments
Scott -- 8/5/2003, 1:00 pm
Re: S&G: Follow Directions OR follow forum experim
Scott -- 8/6/2003, 4:08 pm
Re: S&G: Follow Directions OR follow forum experim
Dan G -- 8/6/2003, 8:16 am
I second Dan's advice
Gini -- 8/6/2003, 8:36 pm
Re: S&G: Follow Directions OR follow forum experim
Gini -- 8/5/2003, 10:19 pm
Re: S&G: Follow Directions OR follow forum experim
Jay Doorly -- 8/5/2003, 6:15 pm
Re: S&G: Follow Directions OR follow forum experim
Don -- 8/5/2003, 5:27 pm
Re: S&G: Follow Directions OR follow forum experim
Matthew -- 8/5/2003, 4:26 pm
Re: S&G: Follow Directions OR follow forum experim *LINK*
John Schroeder -- 8/5/2003, 10:19 pm
Re: S&G: Follow Directions OR follow forum experim
Don -- 8/6/2003, 11:02 am
Re: S&G: Follow Directions OR follow forum experim
Jim Kozel -- 8/5/2003, 4:18 pm
Re: S&G: Directions / forum Exp. Correction
Jim Kozel -- 8/5/2003, 4:25 pm
Re: S&G: Follow Directions OR follow forum experim
Chip Sandresky -- 8/5/2003, 3:16 pm