Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Other: Popping Leidy Lid Hooks
By:Nick Schade - Guillemot Kayaks
Date: 8/20/2003, 9:13 am
In Response To: Re: Other: Popping Leidy Lid Hooks (Dale Frolander)

: I've used the 15 minute epoxy before, and although it made for a decent bond,
: it would soften when it got hot out and I would lose a hook. The epoxy on
: my kayak never softens when it gets hot, so when I replaced the hooks with
: ones like you describe I also bonded them on with the slow cure epoxy. I
: haven't had any problems since.

While a good epoxy does not soften as noticeably as 5-minute stuff, it does still soften. Switching from 5-minute will help the problem, but may not be sufficient solution for everyone.

Messages In This Thread

Other: Popping Leidy Lid Hooks *Pic*
Joe Greenley -- 8/19/2003, 10:37 pm
Re: Other: Popping Leidy Lid Hooks *Pic*
Ross Leidy -- 8/19/2003, 11:56 pm
Re: Other: Popping Leidy Lid Hooks
Dale Frolander -- 8/19/2003, 11:08 pm
Re: Other: Popping Leidy Lid Hooks
Nick Schade - Guillemot Kayaks -- 8/20/2003, 9:13 am