Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Flush Hatch Hardware *Pic*
By:Chip Sandresky
Date: 8/20/2003, 7:40 pm
In Response To: Re: Strip: Flush Hatch Hardware (Tim Eastman)

: Aaaaaa, . . yeah *ahem* I knew that.
: Boy do I feel sheepish.

That would be "Baaaaah" :D

You need to get into a good marine hardware store. You can probably find something like them in bronze or nylon. I found these nylon pulls at www.WestMarine.com A bargain at $39.99 :) What's stopping you from molding your own out of hardwood, composites and stainless wire?

Good luck to you. Don't be put off by my joking; it's a cool idea.

- Chip

Messages In This Thread

Strip: Flush Hatch Hardware *Pic*
Tim Eastman -- 8/20/2003, 1:12 pm
Re: Strip: Flush Hatch Hardware
Brownie -- 8/20/2003, 6:42 pm
Re: Strip: Flush Hatch Hardware
Brian Nystrom -- 8/20/2003, 1:44 pm
Re: Strip: Flush Hatch Hardware
Tim Eastman -- 8/20/2003, 3:23 pm
Re: Strip: Flush Hatch Hardware *Pic*
Chip Sandresky -- 8/20/2003, 7:40 pm