Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: flush hatch lay up question
By:Ken Sutherland
Date: 8/28/2003, 1:45 pm
In Response To: Strip: flush hatch lay up question (joe cesario)

Joe

I used 6 layers of 6oz and wondered if it was going to be strong enough. Once it was epoxied in place it was very strong. There is not really much stress on the lip. I think you'd be fine with what you have.

Ken

Messages In This Thread

Strip: flush hatch lay up question
joe cesario -- 8/27/2003, 10:17 pm
Re: Strip: flush hatch lay up question
Ken Sutherland -- 8/28/2003, 1:45 pm
Re: Strip: flush hatch lay up question
Brian Ervin -- 8/28/2003, 12:06 pm
Re: Strip: flush hatch lay up question *LINK*
John Schroeder -- 8/28/2003, 12:43 am
Re: Knot Likely Site
Patsy -- 8/29/2003, 8:12 am
Re: Knot Likely Site
John Schroeder -- 8/30/2003, 12:49 am
Re: Strip: flush hatch lay up question *Pic*
Robert -- 8/27/2003, 11:44 pm
Re: Strip: flush hatch lay up question *Pic*
Robert -- 8/27/2003, 11:56 pm