Boat Building Forum
Find advice on all aspects of building your own kayak, canoe or any lightweight boats
Re: Strip: When to mount hardware (hatches, riggin
By:Ken Blanton
Date: 9/2/2003, 4:33 pm
Date: 9/2/2003, 4:33 pm
In Response To: Strip: When to mount hardware (hatches, rigging) *LINK* (Rick Brannan)
: I'm wondering about hatch hardware and rigging. Should I pre-drill the holes
: for hardware, refill 'em, and all that jazz before or after the two are
: joined?
On my Outer Island,I did it after the halves were joined. I drilled the holes oversize and then filled 'em back up with epoxy filler. I drilled the final bolt holes through the filler after varnishing.
Ken Blanton
Messages In This Thread
- Strip: When to mount hardware (hatches, rigging) *LINK*
Rick Brannan -- 9/2/2003, 12:12 pm- Re: Strip: When to mount hardware (hatches, riggin *LINK*
Rick Brannan -- 9/3/2003, 11:33 am- Re: Strip: When to mount hardware (hatches, riggin
John Schroeder -- 9/2/2003, 5:10 pm- Re: Strip: When to mount hardware (hatches, riggin
Ken Blanton -- 9/2/2003, 4:33 pm - Re: Strip: When to mount hardware (hatches, riggin
- Re: Strip: When to mount hardware (hatches, riggin *LINK*
