Rob,

it looks like you're doing a very nice job, congratulations !

I'll start building a Guillemot in November, and I'm gathering all the information/tricks that I can find about their construction. From your pictures 3, 4 and 5 it seems that you're building the knee braces at the same time (or using the same strips) with which you're building the cockpit recess, and later on glassed everything together (plus some carbon in the glass). Would you mind explaining a little bit how you're doing it ? Any advantages / disadvantages / precautions that should be taken into account ?

Thanks,

Hugo

: The clock is ticking . . . and I'm hoping to at least have a coat of varnish
: before the Rendezvous.

: It's going to be close. I think I can forget the bulkheads for the initial
: launch and put deck lines etc. on later. Still need outside seem and a lst
: fill coat or two. If it warms up again, the epoxy will set faster and I
: can make it. Then again, I may just take it up to NH with epoxy only and
: get that varnish on later. Anyway, here's a pic, if it doesn't come up,
: try photoisland.com, username:pbkayaks password:kayak