: Hi All,

: I've got a problem. I just started stripping the hull of my guillemot. I'm
: approximately 6" from the sheer line. I'm using 1/2" C&B strips.
: The problem is that at the ends(last four forms on each end), the strips
: have pulled away from the forms. The first three inches up from the sheer
: line weren't a problem. I wish I could post a picture but I don't have a
: digital camera. Is there a way to fix this without removing these last
: five strips where they have pulled away from the forms?

: Quentin

Depending on how bad it is. a little steam might help.
I am currently building a Guillemot "L", and had similar problems at the
pinched parts. 2 minutes of steam from a kettle made it easy to push the
strips back into place. I then secured them with a brad. It worked very
well for me.

Good luck

Ross