Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: strips pulling away from forms
By:Quentin
Date: 9/10/2003, 8:50 pm
In Response To: Re: Strip: strips pulling away from forms *LINK* (Glen Smith)

: Green Valley has a tip for this type of problem. Check the link and scroll
: down to about mid-page.

: Glen in Baie-St-Paul.

Thanks for the input guys. I think I'm going to take those last five strips off both sides and restart. I liked the idea of using a piece of scrap and the brads to hold the strip in place while the glue dried. Good thing I haven't completed the hull and I've only got 10 strips to remove.

Quentin

Messages In This Thread

Strip: strips pulling away from forms
Quentin -- 9/10/2003, 6:44 pm
Re: Strip: strips pulling away from forms
Bill B. -- 9/12/2003, 2:31 pm
Re: Strip: strips pulling away from forms
John K -- 9/11/2003, 6:40 pm
Re: Strip: strips pulling away from forms
daren&karen -- 9/11/2003, 12:28 am
halo frames & chopsticks
mike allen -- 9/11/2003, 12:01 pm
Re: Strip: strips pulling away from forms *LINK*
Glen Smith -- 9/10/2003, 8:06 pm
Re: Strip: strips pulling away from forms
Quentin -- 9/10/2003, 8:50 pm
Re: Whoa, Dude!
Ross Sieber -- 9/11/2003, 1:33 pm
Re: Strip: strips pulling away from forms
c -- 9/10/2003, 7:19 pm
Re: Strip: strips pulling away from forms
c -- 9/10/2003, 7:22 pm
Re: Strip: strips pulling away from forms *LINK* *Pic*
Marcel R. in Portland, Or. -- 9/10/2003, 7:12 pm
Re: Strip: strips pulling away from forms
Ross Sieber -- 9/10/2003, 7:10 pm
Re: Strip: strips pulling away from forms
srchr/gerald -- 9/10/2003, 6:53 pm