: I know this has been asked again and again, but I have a question about what
: peoples experiences are with the different types of fiberglass. I want to
: do an expedition type layup, with 2-3 layers of glass on the hull. This
: will be my first experience.

: I was considering using the Raka 5 oz glass, but I have heard tons of
: negative comments. Has anyone tried this since Larry from Raka posted his
: suggestions?

: I would like to not have a hugely heavy boat, but still come out with great
: protection (as does everyone). Any suggestions or previous experience?

Hi Nick, 15oz sound like too much. I have two layers of 3.2oz stainweave inside and out with an extra layer on the bottom and the boat is very rigid and light. Multiple layers can be kind of a headache because you will get bubbles in any slight depression in the previous layer; epoxy will ten to pool there.

Be sure to check Ted Henry's test results at www.kayakforum.com/cgi-bin/Building/index.cgi/noframes/read/82692 For what you described, I would probably try a variation of Sample 6 with a second layer over the football.

I hope this helps. Good luck with it.
www.ChipSandresky.com