Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Strip ripping problem
By:srchr/gerald
Date: 9/16/2003, 4:59 pm
In Response To: Strip: Strip ripping problem *Pic* (Ted G)

The first thing that I would consider is that your blade is getting hot. You may need to make sure your kerf is not closing up on the blade and adjust the speed at which you feed the board.

Messages In This Thread

Strip: Strip ripping problem *Pic*
Ted G -- 9/16/2003, 2:07 pm
Re: Strip: Strip ripping problem
Rob Macks -- 9/17/2003, 5:25 pm
Update...
Ted G -- 9/17/2003, 9:03 am
make strips. not problems :)
Paul G. Jacobson -- 9/17/2003, 5:11 pm
Re: make strips. not problems :)
Ted G -- 9/17/2003, 5:24 pm
Re: Update...
Rob P -- 9/17/2003, 10:05 am
Re: Update...
Ted G -- 9/17/2003, 10:30 am
Re: Update...
Don Lucas -- 9/17/2003, 9:41 am
Re: Nice pattern though... !!
Rehd -- 9/17/2003, 12:31 am
Re: Strip: Strip ripping problem
mook -- 9/17/2003, 12:17 am
Re: Strip: Strip ripping problem
Joe Greenley -- 9/16/2003, 10:12 pm
Re: Strip: Strip ripping problem
Handy -- 9/16/2003, 9:02 pm
Re: Strip: Strip ripping problem
Dave -- 9/16/2003, 8:45 pm
Re: Strip: Strip ripping problem
Russ Chambers -- 9/16/2003, 8:30 pm
Re: Strip: Strip ripping problem
Ken Blanton -- 9/16/2003, 6:04 pm
Re: My 2 Cents
Ken Blanton -- 9/16/2003, 5:55 pm
Re: My 2 Cents
Steve Frederick -- 9/16/2003, 7:10 pm
Re: My 2 Cents
Mike Scarborough -- 9/16/2003, 6:35 pm
Re: Strip: Strip ripping problem
srchr/gerald -- 9/16/2003, 4:59 pm
Re: Strip: Strip ripping problem
Chip Sandresky -- 9/16/2003, 4:35 pm
Re: Strip: Strip ripping problem
Jay Babina -- 9/16/2003, 3:20 pm
Re: Strip: Strip ripping problem
Glen Smith -- 9/16/2003, 3:32 pm
One more thing
Jay Babina -- 9/16/2003, 3:30 pm
Re: Strip: Strip ripping problem
Rick Sylvia -- 9/16/2003, 2:37 pm
Saw info *Pic*
Ted G -- 9/16/2003, 2:47 pm
Re: Saw info
Rick Sylvia -- 9/16/2003, 3:01 pm
Re: Strip: Strip ripping problem
Jim Kozel -- 9/16/2003, 2:27 pm
Re: Strip: Strip ripping problem
Ted G -- 9/16/2003, 2:30 pm
Re: Strip: Strip ripping problem
Danny Cox -- 9/16/2003, 2:59 pm