Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Sanding ?
By:Glen Longino
Date: 9/18/2003, 1:45 am
In Response To: Re: Strip: Sanding ? (Paul G. Jacobson)

: Some hardwoods are notoriously porous. Any species of open-grain wood, which
: would typically need to be filled before it gets a final sanding, is going
: to suck up plenty of resin.

: Using a finer grit of sandpaper -- or a sharp plane, or a cabinet scraper
: --will not affect the porosity of the wood, and therefore it won't affect
: how much resin soaks in, or how deep it soaks in.

: The point made about fresh sanding is important. The natural resins (drying
: sap)in many woods will tend to ooze on a nearly microscopic level, and
: eventually reseal their natural pathways in the wood. Even a light sanding
: will reopen those pores -- and your epoxy will soak in by capillary
: action.

: PGJ

Thanks Paul, this thread changes my whole view of sanding. I won't hesitate to ask questions here in the future. I'm certainly glad I did not go ahead and glass my kayak as it is. Regards, Glen

Messages In This Thread

Strip: Sanding ?
Glen Longino -- 9/17/2003, 5:01 pm
Re: Strip: Sanding ?
mike loriz -- 9/18/2003, 9:07 am
Re: Strip: Sanding ?
Glen Longino -- 9/18/2003, 8:50 pm
Re: Strip: Sanding ?
Jay Babina -- 9/18/2003, 7:48 am
Re: Strip: Sanding ?
Dave -- 9/17/2003, 8:42 pm
Re: Strip: Sanding ?
Glen Longino -- 9/17/2003, 9:51 pm
Re: Strip: Sanding ?
Paul G. Jacobson -- 9/17/2003, 6:57 pm
Re: Strip: Sanding ?
Glen Longino -- 9/18/2003, 1:45 am
Re: Strip: Sanding ?
Rob Macks -- 9/17/2003, 5:48 pm
Re: Strip: Sanding ?
srchr/gerald -- 9/17/2003, 7:00 pm
Re: Strip: Sanding ?
Kurt Maurer -- 9/17/2003, 9:50 pm
Re: Strip: Sanding ? *LINK*
srchr/gerald -- 9/17/2003, 10:04 pm
Re: Strip: Sanding ?
Glen Longino -- 9/17/2003, 6:50 pm
Re: Strip: Sanding ?
Rob Macks -- 9/17/2003, 7:28 pm
Re: Strip: Sanding ?
srchr/gerald -- 9/17/2003, 7:07 pm
Re: Strip: Sanding ?
Glen Longino -- 9/17/2003, 9:41 pm
Re: Strip: Sanding ?
srchr/gerald -- 9/17/2003, 10:18 pm
Re: Strip: Sanding ?
Ed Gutgesell -- 9/18/2003, 9:01 am
Re: Strip: Sanding ?
srchr/gerald -- 9/18/2003, 11:04 am
Re: Strip: Sanding ?
Glen Longino -- 9/17/2003, 10:29 pm