my guillemot is making progress all striped out except for the recess.

i thought id put a parts list together.

Expenses:
lumber:
cedar: qty 8 1"x6"x8', qty3 1"x6"x10 foot, and qty1 1"x8"X10'. i bought the 8 footers before realizing the ten footers were all around easier to use.

forms: barging bin chipboard from depot

qty 1- 2"x4"X16' for the strongback
qty 2- 2"x4"x10' for the stands

extras:
2 pint bottles of elmers wood glue
2x1000 boxes of 9/16 stapes
1 razor saw
router bits bead and cove
bag o clamps, the spring kind in a varety of sizes.

stuff i had:
rope for the stands
electric stapler
chisles sharp
electric jigsaw
table saw
infeed and outfeed stands for table saw.
electric extension cord
power strip
radio
block plane
rat tail file
lots of tape masking and packing.
brad nails
pencils
brown paper for the forms
graph paper for the drafting

large t-square
small carpenter square
string
sandpaper 100grit

i think this is complete for the progress so far. a fullty stripped guillemot not including the recess. the expense items total roughly 170$.

i still need sanding and epoxy.