Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

I agree with Kurt...
By:srchr/gerald
Date: 10/14/2003, 10:18 am
In Response To: Strip: bot gets wet--wetted out for fiberglass *LINK* *Pic* (c)

...and if you're using the uscomposites 635/556 slow nonblushing epoxy...which is the only type I recommend from them for laminating...it will still be a little tacky in 4 hours, even in Florida. I always wait till the next day for a seal coat to cure before I start applying fiberglass.

Messages In This Thread

Strip: bot gets wet--wetted out for fiberglass *LINK* *Pic*
c -- 10/12/2003, 8:59 pm
I agree with Kurt...
srchr/gerald -- 10/14/2003, 10:18 am
Re: Strip: bot gets wet--wetted out for fiberglass
Chip Sandresky -- 10/13/2003, 1:01 pm
Re: Strip: bot gets wet--wetted out for fiberglass
Kurt Loup, Baton Rouge -- 10/13/2003, 9:14 am
I agree with Kurt
Robert N Pruden -- 10/13/2003, 1:31 pm
Re: Strip: bot gets wet--wetted out for fiberglass
Mike and Rikki -- 10/13/2003, 12:48 pm