Re: Strip: Project Costs
By:Bruce - TX
Date: 10/17/2003, 10:55 am
Date: 10/17/2003, 10:55 am
In Response To: Re: Strip: Project Costs (Myrl Tanton)
: I found the Epoxy and fiberglass to be by far the most expensive. But I used
: a fairly heavy lay up, and West Epoxy. There are much cheaper alternatives
: to west.
: but then I used cedar fence boards, and live in the North West, so for me
: cedar for a full kayak would cost less than $50 Cdn.
: I did buy a router and the bits for the project, but I'm not counting that,
: as I hope to find another use for it.
: cheers.
: Myrl
HA! I thought I was the only one using ceader fence boards. Here in Texas I bought more than enought ceader for the small canoe I'm working on for less then $13!
Bruce
Messages In This Thread
- Strip: Project Costs
Chris -- 10/16/2003, 1:39 pm- Re: Strip: Project Costs
Gordon Snapp -- 10/17/2003, 12:17 am- Re: Strip: Project Costs
Myrl Tanton -- 10/16/2003, 11:09 pm- Re: Strip: Project Costs
Bruce - TX -- 10/17/2003, 10:55 am- other uses B&C for router bits
Paul G. Jacobson -- 10/16/2003, 11:44 pm- Re: other uses B&C for router bits
Bob Kelim -- 10/17/2003, 7:30 am
- other uses B&C for router bits
- Re: Strip: Project Costs
c -- 10/16/2003, 5:54 pm- Re: Strip: Project Costs
Kyle T -- 10/16/2003, 2:14 pm- Re: Strip: Project Costs
mike loriz -- 10/16/2003, 2:01 pm - Re: Strip: Project Costs
- Re: Strip: Project Costs