Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Shop: Milling Your Own Wood
By:Kyle T
Date: 10/21/2003, 4:23 pm
In Response To: Re: Shop: Milling Your Own Wood (Rob P.)

: Simple as possible would be to hire someone with a portable bandsaw mill and
: have them come to your property to mill the trees into lumber. I believe
: that Woodmizer ( http:/www.woodmizer.com ) will give referrals to owners
: of their bandsaw mills in your area if you ask. You can also look in your
: local phone book for "Sawmills" to find a local sawyer in your
: area. If no luck there, try contacting come local arborists and tree
: removal services for leads to people with bandmills.

: Milling your own lumber with a chainsaw is hot, hard, difficult, heavy, and
: tiring work. Even with one of those chainsaw attachments, it's still not
: something I would do more than once.

Woodmizers are cool. Looked into buying one about 15 years ago. At the time they sent out a video on how they worked. It was the single most boring video I've ever watched. It was so bad that it became a big joke at our house to pump up anyone that came over and make them sit and watch the video. Several fights erupted.

Last year we did hire a local party to come over and mill some boards for us. He showed up with a Woodmizer. His had an attachment for lifting the full length logs onto the bed for cutting. Worked really well and the saw has a thin kerf blade so little was wasted. After the boards air dried they and were used in remodeling the house.

--KT--

Messages In This Thread

Shop: Milling Your Own Wood
Bryan -- 10/21/2003, 11:59 am
Re: Shop: Milling Your Own Wood *Pic*
Paul G. Jacobson -- 10/22/2003, 1:37 am
Thanks this is perfect! *NM* *NM*
Bryan -- 10/22/2003, 9:43 pm
Re: Shop: Milling Your Own Wood
Rob P. -- 10/21/2003, 2:43 pm
Re: Shop: Milling Your Own Wood
Kyle T -- 10/21/2003, 4:23 pm
Re: Shop: Milling Your Own Wood
Rick Tatum -- 10/21/2003, 7:02 pm
Re: Shop: Milling Your Own Wood
Rob Macks -- 10/21/2003, 2:08 pm
Re: Shop: Milling Your Own Wood
Mike Scarborough -- 10/21/2003, 12:51 pm
Re: Shop: Chainsaw bar mill
Pete Roszyk -- 10/21/2003, 12:40 pm
Re: Shop: Chainsaw bar mill
Arko Bronaugh -- 10/21/2003, 1:51 pm
Re: Shop: Chainsaw bar mill
c -- 10/21/2003, 2:46 pm