Re: Strip: Fresh milled white cedar
By:KenC
Date: 10/21/2003, 9:08 pm
Date: 10/21/2003, 9:08 pm
In Response To: Re: Strip: Fresh milled white cedar (Ken Sanders)
: Lee I cut some cedar strips from a board that was air dried for a year.I
: taped the strips into packages of 15 and left them for about a month. When
: I went to use them some of them were alright but some bent like a snake
: when I took the tape off. I don't know a good answer for you, just what I
: had happen to me. My strips where kept inside my work shop on racks that
: support them the full lenght of the strip.Good Luck
I don't know how green my white cedar was when I milled it, but some of my strips did the same thing. As if all the internal stresses of the entire plank were shoved into these one or two strips.
Messages In This Thread
- Strip: Fresh milled white cedar
Lee -- 10/20/2003, 10:45 pm- Re: Strip: Fresh milled white cedar
Jim Looker -- 10/21/2003, 11:16 am- Re: Strip: Fresh milled white cedar
mike loriz -- 10/21/2003, 9:19 am- Re: Strip: Fresh milled white cedar
Ken Sanders -- 10/21/2003, 9:00 am- Re: Strip: Fresh milled white cedar
KenC -- 10/21/2003, 9:08 pm
- Re: Strip: Fresh milled white cedar
Mike Scarborough -- 10/21/2003, 8:46 am - Re: Strip: Fresh milled white cedar
- Re: Strip: Fresh milled white cedar