Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Skin-on-Frame: Epoxy over Nylon
By:Scott Ferguson
Date: 10/22/2003, 1:46 pm
In Response To: Re: Skin-on-Frame: Epoxy over Nylon (Paul Probus)

: Scott,
: While I understand that you are trying to keep from recommending a process
: that may turn out not to be very good after all, your response sure makes
: it seem like you're advocating it. If it ends up holding up, then this may
: be a better alternative than just varnish over Nylon.
: Thank you for the update to what you've done and how its held up after one
: season.
: Paul

Paul
I should have kept that post short and to the point and simply said that I had tried epoxy and fiberglass on nylon and liked it, but didn't know how well it would hold up over time... instead, I get excited and start typing. My fingers can easily go twice as fast as my brain and before you know it the message gets posted. Right then is usually when I say to myself, "that sounded stupid, should have just said..." but it's too late. :(
Truth is, many of the stunts I try, don't work. Or worse yet, they appear to work, but backfire later. I've posted many of these flops only to come back later with my tail between my legs and explain how I screwed up. In this particular response regarding epoxy on nylon, I should have confessed that I'm excited about the process and the finished appearance, but have no clue as to how well it will hold together, BUT I would sure like to see other SOF builders try it (as a test) and see what they think. I guess what I typed was a verbose way of advocating more tests. :D Just my way of avoiding the dreaded "Don't try this at home" warning. Even though trying new things is half the fun.
Scott

PS-I re-read my own post again, and it does sound stupid. I'm kicking myself as I type. Must...(ouch!) keep... posts... (ouch!!) short...(ouch!) and... to... (ouch!) the... point.

I'll keep you posted on progress.

Messages In This Thread

Skin-on-Frame: Epoxy over Nylon
Chip Sandresky -- 10/20/2003, 4:05 pm
Re: Skin-on-Frame: Epoxy over Nylon *Pic*
Scott Ferguson -- 10/21/2003, 3:04 pm
Re: Skin-on-Frame: Epoxy over Nylon
Paul Probus -- 10/22/2003, 12:42 pm
Re: Skin-on-Frame: Epoxy over Nylon
Scott Ferguson -- 10/22/2003, 1:46 pm
Re: Skin-on-Frame: Epoxy over Nylon
Paul Probus -- 10/22/2003, 2:32 pm
Re: Skin-on-Frame: Epoxy over Nylon
Scott Ferguson -- 10/22/2003, 6:13 pm
One question
Brian Nystrom -- 10/21/2003, 1:18 pm
Re: One question
Chip Sandresky -- 10/21/2003, 1:25 pm
Re: Skin-on-Frame: Epoxy over Nylon
Arko Bronaugh -- 10/20/2003, 10:38 pm
Re: Skin-on-Frame: Epoxy over Nylon
West -- 10/21/2003, 12:49 am
Re: Skin-on-Frame: Epoxy over Nylon
Arko Bronaugh -- 10/20/2003, 10:36 pm
Yes, I used epoxy
Jay Babina -- 10/21/2003, 8:01 am