Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Sirclampsalot triumphs! *Pic*
By:Nickle
Date: 10/26/2003, 10:46 pm
In Response To: S&G: Bending the strips on a coaming rim (snap,arrrrgh) (Nickle)

Hello All,

thanks for your replies.

I ended up thinning the strips down and clamping them around the coaming wet after soaking in a PVC pipe for a few days. I left them clamped overnight and then removed them, epoxied them and glued them on to the coaming.

I only had one clamp left at the end of this.

The cockpit should look nice when it is cleanned up.

Nicholas Sheahan
Mildura Australia

Messages In This Thread

S&G: Bending the strips on a coaming rim (snap,arrrrgh)
Nickle -- 10/24/2003, 11:26 pm
Sirclampsalot triumphs! *Pic*
Nickle -- 10/26/2003, 10:46 pm
Re: S&G: Bending the strips on a coaming rim (snap
mike loriz -- 10/25/2003, 10:31 am
Re: S&G: Bending the strips on a coaming rim (snap
ChrisO -- 10/25/2003, 12:36 am
Re: S&G: Bending the strips on a coaming rim (snap
Myrl Tanton -- 10/24/2003, 11:43 pm
Re: S&G: Bending the strips on a coaming rim (snap
Kurt Hoffman -- 10/24/2003, 11:40 pm