Boat Building Forum

Find advice on all aspects of building your own kayak, canoe or any lightweight boats

Re: Strip: Help! bad layup
By:Jay Babina
Date: 11/6/2003, 8:27 am
In Response To: Strip: Help! bad layup (dave h)

Fortunately it's on the bottom.

I always wet out glass good with fresh batches and warm epoxy. I use more epoxy than neded and squeege later. I use a brush. Even if you use a roller, you have to make sure that the cloth is getting good and soaked.

Messages In This Thread

Strip: Help! bad layup
dave h -- 11/5/2003, 12:51 pm
Re: Strip: Help! bad layup
Jay Babina -- 11/6/2003, 8:27 am
Re: Strip: Help! bad layup
Mike and Rikki -- 11/6/2003, 12:04 am
Re: Strip: Help! bad layup
Dave H -- 11/6/2003, 1:16 am
Re: Strip: Help! bad layup
Gordon Niessen -- 11/6/2003, 7:56 am
Yes *NM*
Dave H -- 11/6/2003, 7:18 pm
Re: Strip: Help! bad layup *Pic*
Chip Sandresky -- 11/5/2003, 2:05 pm